Fender DPT-100 Detachable Pedal Tuner

Stay tuned with Fender's DPT100 detachable pedal tuner. They've made the best even better by updating the industry standard PT10 pedal tuner. An easy-to-read LED note indicator has replaced the note-indicating LED bar. As an additional upgrade, you can remove this tuner from the pedal and use it by itself!

Fender DPT-100 Detachable Pedal Tuner Features:

Removable tuner module for stage and studio use
High-quality, built-in microphone for acoustic tuning
4 modes of tuning operation which include:
Normal tuning mode calibrated to 440Hz:
The 8 blue tuning LEDS show the flat or sharp tuning of the note in 5 cent steps. The red center
tune led shows when the note is in tune.
Calibrate mode:
Tuner changes internal calibration frequency from 435Hz-445Hz.
Auto tuning mode automatically calibrates to an external signal source. Activated either by the built-in external
mic or ¬" input.
Flat tuning mode:
Tuner calibrates in flats, one semitone. The range is one flat (one semitone) through 7 flats (a
fifth) lower than standard.
2 dedicated outputs (1 for muted tuning and 1 for straight signal pass through)
One for muted tuning
One for straight signal pass through
Last function memory recall
Remembers your settings when turning on and off.
Bullet-proof construction to endure both the rigors of the road and prolonged studio use